Reference: SHEARWATER-TERIC-LIMITED EDITION
Brand: SHEARWATER
Scuba diving computer watch Shearwater Teric LIMITED EDITION 2020. Only 2000x produced in the world ! Very limited stock !
Reference: ISOTTA-TG5-PACK
Brand: ISOTTA
Pack camera housing ISOTTA + OLYMPUS TG5. Made of anodised aluminum. 100m waterproof. Made in Italy.
Reference: SHEARWATER-TERIC-WITHOUT
Brand: SHEARWATER
Scuba diving computer watch Shearwater Teric. Pre-order, ATTENTION, available 1st week of October
Reference: IKELITE-IKE 4060.35
Brand: IKELITE
Flash pack Ikelite DS160 Ni-MH with aluminum arm Ikelite + single cord and charger. A very powerful TTL flash with a built-in pilot lamp
Reference: SHEARWATER-PERDIX-AI
Brand: SHEARWATER
Dive computer Shearwater Perdix AI. Air, Nitrox, Trimix and pressure transmitter in option (2x gaz possible).
Reference: SHEARWATER-PETREL2OCCC-TITANIUM
Brand: SHEARWATER
Dive computer Shearwater PETREL 2 TITANIUM OC CC. Air, Nitrox, Trimix CCR. Dive computer w/o external sensor.
Reference: SHEARWATER-PERDIX
Brand: SHEARWATER
Dive computer Shearwater Perdix AI. Air, Nitrox, Trimix and pressure transmitter in option (2x gaz possible).
Reference: SHEARWATER-PETREL2OCCC
Brand: SHEARWATER
Dive computer Shearwater PETREL 2 OC CC. Air, Nitrox, Trimix CCR. Dive computer w/o external sensor.
Reference: FANTASEA-PACKG9X
Brand: FANTASEA
Pack housing Fantasea + Canon G9X. Includes Fantasea housing + Canon G9x + 16Go class 10 SD card. 60m waterproof.
Reference: RATIO-IX3M[GPS]TECH[1]
Brand: RATIO COMPUTERS
SECOND HAND : Dive computer Trimix RATIO iX3M [Gps] Tech+. For Air/Nitrox/Trimix//CCR dives. Air management transmitter compatible. GPS.
Reference: ANALOX-ATA
Brand: ANALOX
Analox ATA-PRO analyzer for trimix mixing. Allows you to instantly measure the oxygen and helium content of your dive tank.
Reference: IKELITE-TG6 PACK 6233.06
Brand: IKELITE
Diving scuba photo pack including Olympus TG6 camera Ikelite housing waterproof to 60m + SD card 16GB
Reference: IKELITE-TG5 PACK 6233.06
Brand: IKELITE
Dive photo pack with Ikelite housing waterproof to 60m + camera Olympus TG4 + SD card 16GB
Reference: PARALENZ-PAR101
Brand: PARALENZ
Underwater camera 4K PARALENZ+ waterproof to 250m. The first camera designed for divers. Water resistant to 250m.
Reference: SEA&SEA YS-01
Brand: Sea&Sea
Underwater Flash Sea & Sea YS-01. Ideal to start the macro type underwater photo. Guide number 20.
The manometer for scuba diving is essential for the measurement of pressure in the bottle.
There are several types of dive manometers. The dive pressure gauge will be connected to the regulator by a high pressure hose.
The immersible mini-manometer is directly attached to a high pressure outlet of the first stage.
The surface gauge is used to check the pressure of the tank on a DIN or yoke.
There are 28 products.
Reference: MMT-0121C
Air scuba pressure gauge. Scale 0-450bars, European manufacturing. Diameter 63mm. Rubber hose 80cm long.
Reference: MMT-017C
Air scuba pressure gauge. Scale 0-400bars, European manufacturing. Diameter 63mm. Rubber hose 80cm long.
Reference: MMT-008C
Oxygen Manometer. Scale 0-450bars, European manufacturing. Diameter 52mm. Rubber hose 80cm long.
Reference: MMT-012C
Air scuba manometer. Scale 0-450bars, European manufacturing. Diameter 52mm. Rubber hose 80cm long.
Reference: TECLINE-T10110-1
Brand: TECLINE
TECLINE pressure gauge 0-400bar diameter 52mm with hose 80cm. With elastomer protection. Heat-tempered glass. CE approved
Reference: TECLINE-T10010
Brand: TECLINE
Oxygen Manometer TECLINE. Scale 0-300bar, European manufacturing. Diameter 52mm. Rubber hose 15cm long.
Reference: MMT-009C
Oxygen Manometer. Scale 0-450bars, European manufacturing. Diameter 52mm. Rubber hose 15cm long.
Reference: SMY-001C
Yoke surface pressure gauge 0-400bar. To check the pressure of your yoke valve tank !
Reference: SMD-001C
DIN 300 bars surface pressure gauge. Scale from 0 to 400bar. Easy purge by ring rotation.
Reference: SMD-002C
DIN 300 bars surface pressure gauge. Scale from 0 to 400bar. Easy purge by button rotation. Degreased, Nitrox compatible.
Reference: SMD-004C
DIN 300 bars surface pressure gauge. Scale from 0 to 400bar. Easy purge by ring rotation. Rubber protection.
Reference: MMT-007C
Spare capsule manometer 52mm. Scale 0-450 bars, Diameter 63mm, European manufacturing. For AIR usage only
Reference: MMT-011C
Spare capsule manometer 52mm. Scale 0-450 bars, Diameter 63mm, European manufacturing. With mineral glass.
Reference: MMT-0014C
Spare capsule OXYGEN pressure gauge 52mm. Scale 0-450 bars, Diameter 63mm, European manufacturing.
Reference: MMT-010C
Spare capsule manometer 63mm. Scale 0-450 bars, Diameter 63mm, European manufacturing. For AIR usage only
Reference: TECLINE-T10040
Diving pressure gauge 52mm capsule. Scale 0-400bar. Heat-tempered glass. Fully chromed
Reference: TECLINE-T10030
Diving pressure gauge 52mm capsule. Scale 0-300bar. Heat-tempered glass. Fully chromed
Reference: MMT-002C
Pony bottle pressure gauge 0-350bars to be fixed on a high pressure hose or a regulator HP outlet. CE, highlighted in the night
Reference: MMT-013C
Tech manometer 0-400bar diameter 52mm with mineral glass and SS snap hook. Allows a quick pression reading.
