Reference: COLTRI - CSC000120E
Brand: COLTRI
COLTRI MCH6 EM STANDARD ELECTRICAL MOTOR 240 V MONO
COLTRI MCH6-EM Electric Standard Compressor - Single Phase 240 V Motor
There are 20 products.
Reference: HA-001C
Generic adaptor for SCUBAPRO® AIR2 to be used with a standard LP hose. Standard male thread 9/16.
Reference: HA-004C
90° elbow for regulator second stage
Reference: HA-006C
110° elbow for regulator second stage
Reference: FCD-003C
Degreased stop flow control device for regulator second stage. Allow to stop the gaz flow in case of free flow.
Reference: FCD-004C
Flow control device (DEGREASED) for regulator second stage (long model)
Reference: MMT-015C
Green plastic protection for 52mm manometer. Green color for oxygen and nitrox use. Includes a fastener on the side.
Reference: MMT-016C
Black plastic protection for 52mm manometer. Black color for air use. Includes a fastener on the side.
Reference: MMT-017C
Black plastic protection for 63mm manometer. Black color for air use. Includes a fastener on the side.
Reference: MOH-001C
Octopus magnetic holder. Easily keep close and remova ny scuba hose. Easy for an octopus regulator.
Reference: MSF-001C
This adptor allows a quick connect to a regulator or BOV
Reference: REH-PROT1
Flanged hose protection. Protect your regulator, wing or pressure gauge hose against bending or hernias.
Reference: REH-PROT2
Diving regulator hose protector or stab. Elastomer, 80mm in length. Internal diameter of 12mm
Reference: REH-PROT2
Diving flexible diving protector NITROX ONLY mark. Protects the regulator, wing or manometer hose against bending. NITROX ONLY visual
Reference: TR360-006C
Regulator second stage hose swivel. Allows the regulator second stage to turn 360°. Optimizes the comfort.
Reference: TR360-0061C
Brand: OMNISWIVEL
Regulator second stage hose swivel. Allows the regulator second stage to turn 360°. Optimizes the comfort.
Reference: TR360-003C
360° swivel to fix on the scuba diving regulator second stage. More comfort in mouth with this swivel.
Reference: AMX - KONNECT 12MM
Brand: AMX Teknology
Holding clip with stainless steel carabiner. The retaining clip is a clever solution to secure and identify your diving hose. Machined aluminium part. For 12mm hose. Available colors Black / Red / Blue / Green / Purple / Yellow / Silver / Orange
Reference: AMX - KONNECT 7.5MM
Brand: AMX Teknology
Holding clip with stainless steel carabiner. The retaining clip is a clever solution to secure and identify your diving hose. Machined aluminium part. For 7.5mm hose. Available colors Black / Red / Blue / Green / Purple / Yellow / Silver / Orange
Reference: AMX - R-clip
Brand: AMX Teknology
Holding clamp for corrugated hose For holding the stab hose. Machined in marine aluminium For 28mm corrugated hose 8 colors available Made in France