







The scuba diving pressure gauge is essential for controlling the pressure of the scuba tank.
There are several types of diving submersible pressure gauges depending on the diameter of the dial or use AIR or NITROX for example which requires a specific degreasing.
This dive manometer attaches directly to a high pressure outlet of the regulator.
It is graduated from 0 to 450bar with perfect readability thanks to its 63mm diameter
This dive manometer will be used on regulators for use in air only. Very practical, its elastomer protection can allow to hang with a carabiner for example.
This submersible dive manometer is of European manufacture. It is CE EN250 approved
Technical characteristics :