Reference: IKELITE-IKE 4060.35
Flash pack Ikelite DS160 Ni-MH with aluminum arm Ikelite + single cord and charger. A very powerful TTL flash with a built-in pilot lamp
TECLINE V1 ICE / TEC2 scuba regulator pack TECLINE: 2x 1st stage V2 ICE + 2x 2nd stage TEC2 + pressure gauge 300bar + Bag + carabiner 88mm
TECLINE V2 ICE / TEC2 scuba regulator pack TECLINE: 2x 1st stage V2 ICE + 2x 2nd stage TEC2 + pressure gauge 300bar + Bag + carabiner 88mm
Brand: RATIO COMPUTERS
SECOND HAND : Dive computer Trimix RATIO iX3M [Gps] Tech+. For Air/Nitrox/Trimix//CCR dives. Air management transmitter compatible. GPS.
TECLINE R2 TEC2 scuba regulator pack SIDEMOUNT : 2x 1st stages R2 ICE + 2x 2nd stage TEC2 + 2x gauges 300bar + bag + 2x carabiner
Toolings for HP tubes
For high pressure installations for diving and high pressure networks such as compressors, it is necessary to use specially adapted tools.
We offer you professional tools for working on 6mm and 8mm stainless steel high pressure tubes.
Indeed, a high pressure stainless steel tube must be perfectly cut to ensure the tightness with the fittings. It is not possible to use a hacksaw. The stainless steel pipe cutter is perfectly suited for this purpose.
To make angles, it will be necessary to use a stainless steel pipe bender.
We also propose to use a reamer or deburrer for dtainless steel tubes from 6mm to 32mm to prevent chips from passing through the valves.
Professional deburrer for tubes from 6mm to 32mm. Allows deburring by rotation of the inner and outer diameter to allow sealing with fittings.