Reference: FANTASEA-FAN1520-PACK1650-A6300
Brand: FANTASEA
Fantasea digital camera subwoofer + digital camera Sony A6300 + 16-50mm lens
Reference: FANTASEA-PACKRX100V
Brand: FANTASEA
Pack housing Fantasea + Sony Rx100 V. Includes Fantasea housing + Sony RX100 V + 16Go class 10 SD card. 60m waterproof.
Reference: FANTASEA-PACKG7X III
Brand: FANTASEA
Fantasea FG7X-III vacuum scuba housing package + Canon G7X MK III. Includes the 60m waterproof housing + Canon G7x MARK III + a 16GB SD card class 10 + vacuum pump.
Reference: SHEARWATER-PETREL 2 EXT TITANIUM
Brand: SHEARWATER
Dive computer Shearwater PETREL 2 EXT TITANIUM. Air, Nitrox, Trimix and connexion with the CCR sensor by Fisher outside connector.
Reference: FANTASEA-PACKRX100IV
Brand: FANTASEA
Pack housing Fantasea + Sony Rx100 IV. Includes Fantasea housing + Sony RX100 IV + 16Go class 10 SD card. 60m waterproof.
Reference: FANTASEA-PACKG7X III
Brand: FANTASEA
Fantasea FG7X-III scuba housing package + Canon G7X MK III. Includes the 60m waterproof housing + Canon G7x MARK III + a 16GB SD card class 10.
Reference: FANTASEA-PACKRX100III
Brand: FANTASEA
Pack housing Fantasea + Sony Rx100 III. Includes Fantasea housing + Sony RX100 III + 16Go class 10 SD card. 60m waterproof.
Reference: FANTASEA-PACKG7X II
Brand: FANTASEA
Fantasea FG7X-II vacuum scuba housing package + Canon G7X MK II. Includes the 60m waterproof housing + Canon G7x MARK II + a 16GB SD card class 10 + vacuum pump.
Reference: FANTASEA-UWL-09-PRO
Brand: FANTASEA
Fantasea UWL-09-PRO ultra-wide angle underwater professional lens. Optical glass dome. Threaded M67
Reference: FANTASEA-FAN1520
Brand: FANTASEA
Case Fantasea FA6500 waterproof to 60 meters. This Fantasea underwater housing is compatible for SONY A6500 and A6300 camera
Reference: SHEARWATER-TERIC-LIMITED EDITION
Brand: SHEARWATER
Scuba diving computer watch Shearwater Teric LIMITED EDITION 2020. Only 2000x produced in the world ! Very limited stock !
Reference: SHEARWATER-TERIC-WITHOUT
Brand: SHEARWATER
Scuba diving computer watch Shearwater Teric. Pre-order, ATTENTION, available 1st week of October
Reference: FANTASEA-PACKG7X[1]
Brand: FANTASEA
Pack housing Fantasea + Canon G7X MK II. Includes Fantasea housing + Canon G7x + 16Go class 10 SD card. 60m waterproof.
Reference: FANTASEA - FAN pack 1360
Brand: FANTASEA
Pack including a CANON G7X II with its waterproof housing FANTASEA FG7X-II
Reference: IKELITE-IKE 4060.35
Brand: IKELITE
Flash pack Ikelite DS160 Ni-MH with aluminum arm Ikelite + single cord and charger. A very powerful TTL flash with a built-in pilot lamp
All the accessories for your regulators like the bags of storage of round or square regulators, octopus holder, regulator holders
There are 25 products.
Reference: FCD-008C
Unidirectional check valve in 9/16 male and Quick Disconnect. Avoids the entry of water.
Reference: FCD-004C
Flow control device (DEGREASED) for regulator second stage (long model)
Reference: FCD-003C
Degreased stop flow control device for regulator second stage. Allow to stop the gaz flow in case of free flow.
Reference: FCD-006C
Flow control device for regulator. Fix on first stage 3/8-24 port.
Reference: TA-008C
Shut-off valve for inflator. Allow to stop the air leaking from a defect inflator during a dive.
Reference: FCD-007C
Viton o'ring spare kit for LONG flow control device (Diveavenue P/N FCD-004C).
Reference: FCD-005C
Viton o'ring spare kit for flow control device (Diveavenue P/N FCD-003C)
Reference: OPV-002C
Overpressure valve for regulator. Degreased item with viton o'ring. Imperative when using a stop-flow
Reference: VSP-014C
Regulator rubber protector. To protect your regulator yoke type from dust and water when stored. Sold with lanyard.
Reference: BAG-006C
Round padded regulator bag to protect your regulator and its instruments. Dimensions 28cm x13cm
Reference: BAG-007C
Round padded regulator bag to protect your regulator and its instruments. Dimensions 28cm x 36cm x 12cm
Reference: HP-PLUG
HP nut 7/16"-20
Reference: JH-001C
Silicon regulator necklace 72cm long to keep a scuba regulator close. Possible yellow or black color
Reference: MOH-001C
Octopus magnetic holder. Easily keep close and remova ny scuba hose. Easy for an octopus regulator.
Reference: MOH-002C
The magnetic octopus holder allows to always keep your octopus close to you. Made from aluminum and Delrin.