Reference: ISOTTA-TG5-PACK
Brand: ISOTTA
Pack camera housing ISOTTA + OLYMPUS TG5. Made of anodised aluminum. 100m waterproof. Made in Italy.
Reference: SHEARWATER-TERIC-WITHOUT
Brand: SHEARWATER
Scuba diving computer watch Shearwater Teric. Pre-order, ATTENTION, available 1st week of October
Reference: IKELITE-IKE 4060.35
Brand: IKELITE
Flash pack Ikelite DS160 Ni-MH with aluminum arm Ikelite + single cord and charger. A very powerful TTL flash with a built-in pilot lamp
Reference: SHEARWATER-PERDIX-AI
Brand: SHEARWATER
Dive computer Shearwater Perdix AI. Air, Nitrox, Trimix and pressure transmitter in option (2x gaz possible).
Reference: SHEARWATER-PERDIX
Brand: SHEARWATER
Dive computer Shearwater Perdix AI. Air, Nitrox, Trimix and pressure transmitter in option (2x gaz possible).
Reference: SHEARWATER-PETREL2OCCC
Brand: SHEARWATER
Dive computer Shearwater PETREL 2 OC CC. Air, Nitrox, Trimix CCR. Dive computer w/o external sensor.
Reference: FANTASEA-PACKG9X
Brand: FANTASEA
Pack housing Fantasea + Canon G9X. Includes Fantasea housing + Canon G9x + 16Go class 10 SD card. 60m waterproof.
Reference: IKELITE-TG5 PACK 6233.06
Brand: IKELITE
Diving scuba photo pack including Olympus TG6 camera Ikelite housing waterproof to 60m + SD card 16GB
Reference: RATIO-IX3M[GPS]TECH[1]
Brand: RATIO COMPUTERS
SECOND HAND : Dive computer Trimix RATIO iX3M [Gps] Tech+. For Air/Nitrox/Trimix//CCR dives. Air management transmitter compatible. GPS.
Reference: ANALOX-ATA
Brand: ANALOX
Analox ATA-PRO analyzer for trimix mixing. Allows you to instantly measure the oxygen and helium content of your dive tank.
Reference: TECLINE-T15260
Brand: TECLINE
TECLINE V1 ICE / TEC2 scuba regulator pack TECLINE: 2x 1st stage V2 ICE + 2x 2nd stage TEC2 + pressure gauge 300bar + Bag + carabiner 88mm
Reference: IKELITE-TG5 PACK 6233.06
Brand: IKELITE
Dive photo pack with Ikelite housing waterproof to 60m + camera Olympus TG4 + SD card 16GB
Reference: TECLINE-T15180
Brand: TECLINE
TECLINE V2 ICE / TEC2 scuba regulator pack TECLINE: 2x 1st stage V2 ICE + 2x 2nd stage TEC2 + pressure gauge 300bar + Bag + carabiner 88mm
Reference: TECLINE-R2-TEC2-T15480
Brand: TECLINE
TECLINE R2 TEC2 scuba regulator pack SIDEMOUNT : 2x 1st stages R2 ICE + 2x 2nd stage TEC2 + 2x gauges 300bar + bag + 2x carabiner
Reference: PARALENZ-PAR101
Brand: PARALENZ
Underwater camera 4K PARALENZ+ waterproof to 250m. The first camera designed for divers. Water resistant to 250m.
Scuba diving carabiners and weight belt rings
When diving, it is necessary to secure your diving accessories such as scuba light, decompression tank etc....
You will find here all the scuba stainless steel carabiners and all stainless steel hardware for scuba diving.
There will also be a large choice of stainless steel D-rings, scuba carabiner clips and rings, stainless steel locking carabiner and weight belt buckles.
A large choice of stainless steel fixing hardware for scuba diving.
There are 36 products.
Reference: RING-002C
Stainless steel ring 33mm diameter. Allow to fix any diving accessories.
Reference: RING-003C
Stainless steel double end clip 90mm long. Allows to insure any scuba diving accessory. Made from marine SS.
Reference: RING-004C
Stainless steel double end clip 100mm long. Allows to insure any scuba diving accessory. Made from marine SS.
Reference: RING-005C
Stainless steel double end clip 115mm long. Allows to insure any scuba diving accessory. Made from marine SS.
Reference: RING-006C
Brass double end clip 100mm long. Allows to insure any scuba diving accessory such as a light or surface buoy.
Reference: RING-007C
Stainless steel U swivel bolt snap 64mm long. The bolt width is 20mm. Made from scuba stainless steel grade
Reference: RING-008C
Stainless steel U swivel bolt snap 76mm long. The bolt width is 25mm. Made from marine stainless steel grade.
Reference: RING-009C
Stainless steel U swivel bolt snap 92mm long. The bolt width is 30mm. Made from scuba stainless steel grade
Reference: RING-010C
Stainless steel O swivel bolt snap 104mm long. The bolt width is 40mm. Made from stainless steel grade for scuba.
Reference: RING-011C
Stainless steel O swivel bolt snap 122mm long. The bolt width is 50mm. Made from stainless steel grade for scuba.
Reference: RING-012C
Brass snap hook 50mm long. The ring width is 30mm. Made from brass to resist to scuba diving activity.
Reference: RING-013C
Brass snap hook 76mm long. The ring width is 32mm. Made from brass to resist to scuba diving and marine activities
Reference: RING-014C
Spring carabiner eye hook 65mm long. This carbine hook has an integrated hole and spring opening system
Reference: RING-016C
Scuba stainless steel snap hook - length 50mm. Allows to quick hook any scuba accessory. Made of marine SS grade.
Reference: RING-017C
Scuba stainless steel snap hook - length 60mm. Allows to quick hook any scuba accessory. Made of marine SS grade.
Reference: RING-018C
Scuba stainless steel snap hook - length 80mm. Allows to quick hook any scuba accessory. Made of marine SS grade.
Reference: RING-019C
Scuba stainless steel snap hook - length 100mm. Allows to quick hook any scuba accessory. Made of marine SS grade.
Reference: RING-020C
Scuba stainless steel carabiner snap hook with eyelet 50mm. Allows to quick hook and safe for unloosing it with the eye insert.
