Reference: COLTRI - CSC000120E
Brand: COLTRI
COLTRI MCH6 EM STANDARD ELECTRICAL MOTOR 240 V MONO
COLTRI MCH6-EM Electric Standard Compressor - Single Phase 240 V Motor
The production of gas mixtures requires suitable equipment, both for its realization and for its control.
You will find in this section all the equipment to check gas mixtures such as oxygen analyzers and helium analyzers for diving.
These oxygen and helium analyzers use oxygen cells and helium cells which must be replaced regularly.
To transfer the gases, it is necessary to use a transfer gaz equilizer. Some gases such as oxygen require an oxygen transfer equilizer
For your gas mixtures for diving, there are many special diving couplings available to go from DIN to M26 for example.
Finally, in the preparation of a gas mixture for diving, we offer dive overfilters.
There are 22 products.
Reference: LYT-001C
Perfect to equalize the pressure of two tanks. Equilizer set DIN/DIN. Hose length of 100cm.
Reference: LYT-002C
Perfect to equalize the pressure of two tanks. Equilizer set DIN/DIN with pressure gauge. Hose length of 180cm.
Reference: LYT-003C
Transfer system for the use of 100% oxygen. Length 1m. Ends in DIN each side. Valve on one side.
Reference: LYT-004C
Equalizer system for the use of 100% oxygen. Length 2m. Ends in DIN each side. Adjustment valve.
Reference: LYT-005C
Perfect to equalize the pressure of two tanks. Equilizer set YOKE/YOKE. Hose length of 100cm.
Reference: LYT-006C
Perfect to equalize the pressure of two tanks. Equilizer set YOKE/YOKE with pressure gauge. Hose length of 180cm.
Reference: TECLINE-T07195
DIN 5/8 female to M26 male adaptor. Allows to use a DIN 5/8 regulator with an M26 tank valve.
Reference: TECLINE - T07200
Brand: TECLINE
M26 female to DIN 5/8 male adaptor. Allows to use an M26 regulator with a DIN 5/8 tank valve.
Reference: RA-008C
Tapered male oxygen adapter to DIN 232bar female.
Reference: TECLINE-10000
Brand: TECLINE
Personal filter for filling diving tanks. Contains an activated carbon filter that can be refilled by yourself. 232bar max.
Reference: TECLINE-10000-5
Brand: TECLINE
Cartridge for a personal filter for the filling of diving cylinders Microporous filter containing replaceable activated carbon. With replacement seals.
Reference: ANALOX-010105
Brand: ANALOX
Spare O2 sensor for Analox O2EII. Necesary to be changed to get an accurate Oxygen measurement.
Reference: ANALOX-ANA 010113
Brand: ANALOX
Oxygen analysis cell for the Analox ATA PRO analyzer. Original cell, the only one that works with the ATA-Pro.
Reference: ANALOX-ANA 010114
Brand: ANALOX
Helium analysis cell for the Analox ATA PRO analyzer. Original cell, the only one that works with the ATA-Pro.
Reference: ANALOX-ATA
Brand: ANALOX
Analox ATA-PRO analyzer for trimix mixing. Allows you to instantly measure the oxygen and helium content of your dive tank.
Reference: ANALOX-O2EIIPRO
Brand: ANALOX
Nitrox ANALOX O2EII PRO Analyser. Very compact, this analyser allow a direct reading of the oxygen ratio measured in the tank.
Reference: COLTRI-SC000936
Brand: COLTRI
Filling connection with anti-whiplash safety valve for tanks with DIN 200 bar valves.
Reference: LYT-007C
Diving DIN/DIN Transfer equalizer in 300bar with integrated mini pressure gauge 0-400bar. 200cm hose and valve at one end.
Reference: DIVESOFT - SET BLENDER
Brand: DIVESOFT
DIVESOFT SET BLENDER oxygen helium gas analyzer pack. Complete set with ready-to-use accessories for helium and oxygen filling stations.
Reference: COLTRI - SC000937
Brand: COLTRI
Filling connection with anti-whiplash safety valve for tanks with DIN 300 bar valves.