Reference: FANTASEA-PACKG7X II
Fantasea FG7X-II vacuum scuba housing package + Canon G7X MK II. Includes the 60m waterproof housing + Canon G7x MARK II + a 16GB SD card class 10 + vacuum pump.
Reference: IKELITE-IKE 4060.35
Flash pack Ikelite DS160 Ni-MH with aluminum arm Ikelite + single cord and charger. A very powerful TTL flash with a built-in pilot lamp
Single 1st stage regulator
The 1st stage of the diving regulator will allow the relaxation of the high pressure of the diving cylinder.
There are several types of 1st stage regulators on the market according to the intended use.
The piston 1st stages are simple and proven mechanics. The diaphragm first stages make it possible to isolate the active part of the regulator from the external medium. Some "cold water" kits are also proposed to prevent the icing phenomena of the regulators by the relaxation of the gas inhaled.
Finally, some 1st stages are prepared especially for uses with oxygen for example. In this case, the 1st stage regulator will have benefited from materials and a suitable manufacturing process.
It is important to pay attention to the output flow of these first floors in your choice. In case of need at depth, a high-flow 1st stage regulator will be required.
1st stage regulator R4 TEC O2 M26x2 EN250A from TECLINE is a small compact regulator in version 02, ideal for cold water diving.
Reference: TECLINE - 88110 - 88115
TECLINE M26 scuba regulator wheel for TECLINE regulator. For screwing regulators onto an M26 fitting