Reference: ISOTTA-TG5-PACK
Brand: ISOTTA
Pack camera housing ISOTTA + OLYMPUS TG5. Made of anodised aluminum. 100m waterproof. Made in Italy.
Reference: SHEARWATER-TERIC-WITHOUT
Brand: SHEARWATER
Scuba diving computer watch Shearwater Teric. Pre-order, ATTENTION, available 1st week of October
Reference: SHEARWATER-PERDIX-AI
Brand: SHEARWATER
Dive computer Shearwater Perdix AI. Air, Nitrox, Trimix and pressure transmitter in option (2x gaz possible).
Reference: SHEARWATER-PERDIX
Brand: SHEARWATER
Dive computer Shearwater Perdix AI. Air, Nitrox, Trimix and pressure transmitter in option (2x gaz possible).
Reference: SHEARWATER-PETREL2OCCC
Brand: SHEARWATER
Dive computer Shearwater PETREL 2 OC CC. Air, Nitrox, Trimix CCR. Dive computer w/o external sensor.
Reference: IKELITE-TG5 PACK 6233.06
Brand: IKELITE
Diving scuba photo pack including Olympus TG6 camera Ikelite housing waterproof to 60m + SD card 16GB
Reference: IKELITE-TG5 PACK 6233.06
Brand: IKELITE
Dive photo pack with Ikelite housing waterproof to 60m + camera Olympus TG4 + SD card 16GB
Reference: ANALOX-O2EIIPRO
Brand: ANALOX
Nitrox ANALOX O2EII PRO Analyser. Very compact, this analyser allow a direct reading of the oxygen ratio measured in the tank.
Reference: SCUBABLUE-SUNFISH-4000
Brand: SCUBABLUE
SCUBABLUE SUNFISH 4000 dive light. Beam angle 15 ° - 4000 Lm - Autonomy 2h - Power dimmer included - USB charge.
Reference: TECLINE-10002
Brand: TECLINE
TECLINE R1 Pro O2 regulator oxygen compatible. Composed of 1st stage piston R1 Pro O2 and 2nd stage R1 Pro O2 single uncompensated.
Reference: TKC-7L300BNS
Scuba 7 liter steel tank naked, working pressure 300 bar. European manufacturing. Nitrox ready EN144
Reference: TECLINE-10000
Brand: TECLINE
TECLINE R1 Pro regulator. Composed of 1st stage piston R1 Pro and 2nd stage R1 Pro single uncompensated.
Reference: OMS-12318014
Brand: OMS
OMS SLIPSTREAM flippers pink or white. Technical fins for Tech diving. With spring strap on the back. Size L only
Reference: HOLLIS-M1
Brand: HOLLIS
Diving mask HOLLIS M1. Skirt 100% silicone, mono-glass, frameless and very high visibility thanks to a Saint-Gobain glass.
Air nozzle to be fixed on a low pressure BC hose. Allow to remove water before opening your underwtaer camera.
Security guarantees: 100% secured website
Delivery policy: free shipping from 79 € TTC for France
Returns policy: 15 days from the date of receipt
Compact air nozzle to be fixed on a low pressure BC hose.
With this air nozzle for scuba, just remove the excess of water from your underwtaer camera before opening it.
Just plug in on a BC hose and push on the side to open the valve.
Very useful diving accessory !
No customer reviews for the moment.
Reference: BAL-001C
Surface buoy marking for diving and scuba hunting. Just throw the buoy on your diving site, the 40m rope will immediately unwinding in less than 15sec. Your diving site is marked !
Reference: TW-002C
Cotton terry beatch towel with "DIVE" logo. Dimensions 152cm X 76 cm. Ideal for the diver!
Reference: SPARE-AIR-170
Brand: SPARE AIR
Kit Spair Air 170 complete with tank 0.28L capacity, yoke connection to fill it and yellow holster
Reference: BS-003C
No more tanks that roll into the car's back with those 3 foam tank holder. Also available for one or two tanks.
Reference: BS-001C
No more tanks that roll into the car's back with this one tank foam holder. Available on demand for 2 or 3 tanks
Reference: OA-002C
Diving tank keychain. Allows to put inside some spares O-rings. Can save your dive !
Air nozzle to be fixed on a low pressure BC hose. Allow to remove water before opening your underwtaer camera.
