Reference: COLTRI- SC000100B
Compressor COLTRI MCH 6 Standard - Gasoline engine Honda, Yamaha or Subaru Promotion November 2020 -10% immediate discount - Free servicing pack: 1x oil + 1x air filter + 1 filter cartridge
COLTRI MCH6-EM Electric Standard Compressor - Single Phase 240 V Motor
Reference: FANTASEA-PACKG7X II
Fantasea FG7X-II vacuum scuba housing package + Canon G7X MK II. Includes the 60m waterproof housing + Canon G7x MARK II + a 16GB SD card class 10 + vacuum pump.
Diving compressor NARDI Pacific 21 m3/h Version E35
Compressor Nardi Pacific 21m3/h E35
- Nominal flow rate: 350L/min or 21m3/h
- Three-phase electric motor 380V
- Operating pressure 225bar or 330bar when ordered
- Built-in automatic drain and shutdown
- 2x DIN inflation outlets
- Security guarantees: 100% secured website
- Delivery policy: free shipping from 79 € TTC for France
- Returns policy: 15 days from the date of receipt
Diving compressor Nardi Pacific E35 21m3/h
The high pressure compressor Nardi Pacific E35 is a classic model for diving clubs. It is ideal as a fixed inflation station with low acquisition and operating costs. Why choose a NARDI compressor? Here are the arguments.
Proven engine block
Many technical arguments make it a differentiating block. The compressor block has 3 stages and the use of aluminium allows a very good heat dissipation. The coils are made of stainless steel and the block is not painted to facilitate heat exchange. It is mounted on European ball bearings. It has two lubrication systems, by splash and oil pump. The block integrates 2 oil/water separators. Finally the block rotates at a speed of 1550 rpm.
The chassis used is designed to reduce the weight of the unit. It has aluminium and stainless steel components. The chassis is enveloping with a double anti-vibration system. Its stainless steel components and epoxy paint protect it from corrosion.
The NARDI Pacific E35 compressor is equipped with an electronic management system with an integrated control panel. This new system controls all the key points, such as temperature, oil level, consumption, final pressure, and manages all the solenoid valves.
The compressor is equipped with several filters. Two separators are mounted on the compressor block and a specific one for the breathing air is located on the chassis, guaranteeing many hours of breathing air, in compliance with UNI EN 12021:2014 standard.
Nardi Air Control System, as an option, can be installed at the compressor outlet in order to continuously analyse the compressed air produced, the air humidity, the CO rate, the CO2 rate and the air temperature. The system does not calculate the cartridge autonomy empirically, it performs a real-time analysis and, when the values do not comply with air quality standards, it stops the compressor.
Everything in the compressor is designed to optimize both operating and labor costs. Compressor overhauls, in addition to being inexpensive, are scheduled at long intervals. In order to optimize the operating cost, NARDI has designed a patented automatic condensate drain system, the SLOW FLOW SYSTEM, which reduces the amount of gas used by 80%, in order to keep the entire system pressurized.
Nardi Pacific Range
The Pacific range of compressors is available in 4 versions:
E : open frame version presented here
P: closed frame version and control panel on the frame
C: soundproofed version which integrates better ventilation and therefore compressor cooling
M: Soundproof version with 30% oversized fan. Ideal for very intensive use
On these 4 versions, the pressure and temperature sensor option for compressor control is an option. On all variants, the hour meter is integrated as well as automatic bleeding and shutdown.
Technical Data Sheet
- Power: 7500W Three-phase
- Engine: 380 Volt
- Soundproofing: no
- Noise level: 78 dB
- Flow rate in m3/h: 21
- Filtration: PAC1
- Weight: 123kg
- Cylinders: 3
- Rotational speed: 1550 rpm
- Electronic management: yes
- Automatic purges: yes
- Compression stages: 4
No customer reviews for the moment.
8 other products in the same category:
Reference: COLTRI - SC00090 (MCH8) et COLTRI - SC00095 (MCH11)
Compressor COLTRI MCH8 EM Compact (8.1 m3/h) 240 V Single Phase and Compressor COLTRI MCH11 EM Compact (11.7 m3/h) 240 V Single Phase
Compressor H.P. COLTRI SUPER SILENT TPS MCH 13-ET (14.1 m3/h, 18.9m3/h, COMPACT EVO 20.7m3/h, 22.8m3/h)
Reference: NARDI - PACE162254003AP
Compressor Nardi Pacific 9.6m3/h P16 Nominal flow rate: 160L/min or 9.6 m3/h Single-phase 220V electric motor Operating pressure 225bar or 330bar when ordered Built-in automatic drain and shutdown 2x DIN inflation outlets Wrap-around chassis and electronic console on the chassis.
Reference: NARDI - E230400/50-3AP
Compressor Nardi Pacific 13.8m3/h E23 Nominal flow rate: 230L/min or 13.8m3/h Three-phase electric motor 380V 4kW Operating pressure 225bar or 330bar when ordered Built-in automatic drain and shutdown 2x DIN inflation outlets
Reference: NARDI - PAC-C16-225
Compressor Nardi Pacific Soundproof 9.6 m3/h C16 Nominal flow rate: 160L/min or 9.6 m3/h Single-phase electric motor: 220 V Operating pressure 225bar or 330bar when ordered Built-in automatic drain and shutdown 2x DIN inflation outlets
Reference: NARDI - PACP352254003AP
Compressor Nardi Pacific 21m3/h P35 Nominal flow rate: 350L/min or 21m3/h Three-phase electric motor 380V Operating pressure 225bar or 330bar when ordered Built-in automatic drain and shutdown 2x DIN inflation outlets