
Reference: COLTRI - CSC000120E
Brand: COLTRI
COLTRI MCH6 EM STANDARD ELECTRICAL MOTOR 240 V MONO
COLTRI MCH6-EM Electric Standard Compressor - Single Phase 240 V Motor
O'ring assembly tool. An easy way to avoid any o'ring bad assembly and rubber cracks ! Watch the video !
Very easy to use. Remove the old o'ring, clean the seal groove and put the diving o'ring assembly tool over the thread.
Push the o'ring previously greased with the right grease (air or oxygen compatible). With the o'ring assembly tool, your scuba o'ring is perfectly assembled, without any rubber cracks.
Available for high pressure hose 7/16-20 thread
This maintenance diving tool is made from premium brass.
No customer reviews for the moment.
Reference: TL-037C
Multi-tool divers. The ideal tool to unscrew valve handle, regulators outputs or remove the o'rings from the valves !
Reference: TL-032C
Brand: DIVEAVENUE
Professional regulator intermediate pressure gauge
Reference: TL-015C
Specific two heads screwdriver to unscrew/screw the valves screws specifically dedicated to retain the tanks knobs.
Reference: TL-057C
Whip cleaning brush for scuba tanks. By rotation, the whip's bristles spread out to brush the wall of the diving tank.
Reference: TL-030C
Cover remover. This silicon diaphragm allows to unscrew the 2nd stage regulator cover very easyly !
Reference: TL-003C
Brand: DIVEAVENUE
Regulator intermediate pressure gauge
O'ring assembly tool. An easy way to avoid any o'ring bad assembly and rubber cracks ! Watch the video !