
Reference: COLTRI - CSC000120E
Brand: COLTRI
COLTRI MCH6 EM STANDARD ELECTRICAL MOTOR 240 V MONO
COLTRI MCH6-EM Electric Standard Compressor - Single Phase 240 V Motor
Technical safety signal tube. Length : 1m82, inflator and valve. high quality product, sold in 12 pieces pack.
With this high quality safety signal tube, your surface marker will be visible ! Insure your own safety with this signal tube equipped with both an inflator and valve.
This safety signal tube with inflator and valve can be used by two ways :
- or by blowing air in the tube as a standard signal tube
- or inflated with your BC hose thru the inflator. A second bladder is inflated and the parachute will be strong and straight on surface. A valve is there to avoid any overpressure and also to empty the air when you tide it.
Very high quality product with sewed sides comparing to many glued safety tubes.
On its top, a specific place is made for a personalized marking.
Specifications :
- Length : 1.82m
- Diameter : 18cm
- Materiel : Nylon
- Colors : available in yellow and red
Sold in 12x pieces pack
No customer reviews for the moment.
Référence: RH-001C
Crochet de maintien dans le courant. Indispensable pour les plongées dérivantes sur les récifs ou les photographes !
Marque: DIVESOFT
Fluorescéine plongée pour signaler un plongeur en surface. En capsule de 20g (contenant 11cm sur la photo) et étanche à 100m de profondeur.
Référence: SCL-004C
Marque: TEKTITE
Lampe à éclats 10W STROBE 3500 TEKTITE. Etanche 150m de profondeur et 100h d'utilisation. Puissance 13W
Référence: FLAG-001C
Pavillon Alpha pour signaler les plongeurs. Dimensions 40x35cm. Réalisé en Nylon avec renfort diagonal pour que le drapeau soit visible.
Référence: WS-003C
Ardoise de plongée plate très complète avec crayon et clip. Une ardoise plongée sous-marine de grande dimension 12.5cm x 17.5cm
Référence: WS-002C
Ardoise de plongée plate avec son crayon. Dimensions 15cm x 10cm. Dispose également d'un mousqueton.
Référence: FLAG-002C-50X61
Pavillon Alpha pour signaler les plongeurs. Dimensions 50x39cm et 71x91cm. Réalisé en Nylon, deux œillets intégrés pour fixation.
Référence: SCL-007C
Marque: TEKTITE
Lampe à éclats MARK LITE TEKTITE. Etanche 300m de profondeur et de 11h à 20h d'utilisation. 120x flashs par minute.
Technical safety signal tube. Length : 1m82, inflator and valve. high quality product, sold in 12 pieces pack.