Personal filter "pro" / air 414 bars bare

€220.00
Tax included
TEK2F300

Personal filter "pro" / air 414 bars bare



100% secure payments
Shipping
Free Shipping From 89 € for France * * See conditions
Product return & exchange 14 days to change your mind
24/7 support 24/7 customer return guaranteed
100% secure payment By credit card, bank transfer, PayPal or check
Personal filter "pro" / air 414 bars bare

Professional quality personal filter. Machined from blue anodized aluminum

This individual filter allows to avoid "pollution" of a diving block when inflating if there is a doubt about the quality of air (due to a bad maintenance) delivered by the compressor. Also ideal for protecting your "Oxy-clean" blocks.

 

Technical specifications:

  • Working pressure: 414 bar
  • Test pressure: 850 bar
  • Material: Blue anodized HE30 aluminum
  • Dimensions: 250 x 55mm diameter
  • Maximum flow rate: 283 L/min or 16,8 m3/h
  • Autonomy of a filter cartridge: about 50 blocks of 12 Liters

Delivered with:

  • 1 blue anodized aluminum body 414 bars
  • 1 filter cartridge
  • 1 x 1/4" BSP male outlet
  • 1 x 1/4" BSP female outlet

Spare parts:

  • Filter cartridge TEK20520
  • Replacement gasket kit TEK2F300SK

Important note:

Please note, this overfilter is not suitable for pure oxygen inflation.

For use on Nitrox blocks, the use of a non-return valve is strongly recommended.

The non-return valve prevents explosions in case of mishandling during the inflation procedure. If the pressure in the O2-filled diving block is higher than the pressure upstream of the overfilter, the valve will prevent oxygen from flowing back into the cartridge and will avoid auto-ignition of the activated carbon due to temperature rise (adiabatic compression).

8 autres équipements de plongée dans Catégories
Return top