Diving heating jacket for wetsuit FH1420
You want (at least!) to dive warm? With this warming jacket for wetsuit, it is finally possible!
The warming jacket is unique because it is the only one on the market to allow to dive in wet suit. It consists of a 100% polyester unisex vest with fleece interior. It is particularly fine and covers the back to the kidneys at the back and the chest to the belly at the front.
It is powered by a small external battery of dimensions 180mm long for only 60mm in diameter. A built-in 4x position switch allows to vary the power: OFF / 50% / 75% / 100% and will give 1h50 of autonomy at full power and 3h45 to 50%.
The vest opens on one side and closes with Velcro. There are several sizes according to the grid below.
French made !
Jacket Material : 100 % polyester, fleece inside Power : 60 watts Sizes : From S to XXL Heated area : Whole back, chest and belly.
Battery Pack Canister size : Height 180mm / 7.1 in, Diameter 60mm / 2.4 in Material : Polycarbonate Switch : 4 positions (off / 50% / 75% / 100%)
Color coded depending on the temperature level. Li-Ion battery: 14,8V, 6800 mah (Panasonic) Autonomy : 1h50 at 100% Maximum water depth : 100m / 328 ft
Charger Charge indicator : Light indicator at 100% Charging time : 4h at 220V
Technology and Comfort
Each jacket element is designed to bring you optimum comfort and heat.
Two wide heating areas, front and back.
An adjustable heating temperature, on the battery.
Easy to put on with a large side opening (Velcros), easy to adjust through an elastic zone on the other side.
Very flexible and thin jacket.
How to wash the jacket
The heating element must be removed from the jacket before washing it.
Use the hook and loop Velcro attachment inside the jacket at the head level to remove it. The jacket may be machine washed at cold temperature, using wool or hand-wash programs.
Dry it in fresh air. The heating element must not be washed or chemically treated.
How to store the jacket
Once dry, the jacket must not be folded. It should be stored at ambient temperature, protected from sun and humidity. After using it, it should not be folded but rolled and placed in the bag that we provide for this purpose.
Connectors, cables and battery
Diving connectors are to be carefully handed: avoid any contact with sand, water and dust.
After diving, check for impurities and use the protection caps.
Do not fold the cables. Store them in dry conditions at moderate temperature, protected from sun and humidity.
You should always recharge the battery before storing it, using the provided charger, otherwise degradation may occur. The battery pack must be protected from humidity, shocks, and direct exposure to sun.
SIZING GUIDE :
Here is the sizing guide to take in consideration for your scuba warming jacket.
All of our heated products are exclusively designed to be used underwater. The jacket must always be worn on thin underwear, not directly on the skin. Do not fold, make holes in the jacket, or roll it when you wear it.
Make sure you carefully read the instructions before using it.