SECUBLENDER NITROX Secured Nitrox Stick

SECUBLENDER NITROX Safety Nitrox Stick with Solenoid Valve to Shut Off Oxygen Supply.

The SECUBLENDER Nitrox Stick is a basic and safe installation for performing a Nitrox mix. The device includes a solenoid valve that is coupled to the compressor. If the compressor stops, the solenoid valve immediately cuts off the oxygen supply.

The Secublender Nitrox has a built-in oxygen analyzer with an oxygen sensor for measuring the oxygen level.

The oxygen content of the mixture can be adjusted by means of the pressure reducer supplied, which is attached to the oxygen cylinder. A flow regulator allows the oxygen supply to be regulated.

Several models are adapted to the flow rate of the compressor. Choose yours from the drop-down list.

Contents of the Secublender Nitrox package

• Secublender Nitrox
• Oxytester + oxygen cell
• Pressure reducer for oxygen cylinder
• Solenoid valve shut-off.
• Power supply 220V/24V
• Attention: Connection hose and fitting not included: see Suction Hose and Grooved Fitting

Dimensions of the Secublender :

• Electrical box: 11cm x 11cm x 7cm
• Body version 300: 24cm x Ø50mm and tube Ø30mm - Fittings DN32
• Body version 1000: 35cm x Ø60mm and tube of Ø50mm - Connections DN50