
Reference: COLTRI - CSC000120E
Brand: COLTRI
COLTRI MCH6 EM STANDARD ELECTRICAL MOTOR 240 V MONO
COLTRI MCH6-EM Electric Standard Compressor - Single Phase 240 V Motor
Neoprene protection with holding system for domes with 8" sunshield IKE 5510.45
The 2 rear velcro straps allow the optional attachment of a rear protection, protecting the inside of the porthole from dust. This optional rear protection also allows the storage of small accessories such as grease, spare seals or allen keys for tightening the controls.
N.B.: This article replaces the neoprene cover 0200.81 since August 2016.
Delivered without dome or back protection pocket.
No customer reviews for the moment.
Reference: IKELITE-IKE 6430
Brand: IKELITE
Wide Angle Lens M67 mm IKELITE W30. Ideal for cameras with a focal length of less than 28mm
Reference: NIMAR-NIMV
Brand: NIMAR
NIMAR vacuum pump for NIMAR housings. Allows to test if the housing is correctly waterproofed.
Reference: FANTASEA-FAN5138
Brand: FANTASEA
Wide angle lens FANTASEA M67mm mark II. Ideal for all 67mm portholes and particularly suitable for 1-inch and more sensor cameras
Reference: FANTASEA-FAN 4050
Brand: FANTASEA
Bayonet holder QRS-01 MB1 Female Fantasea for housings with porthole M67. Allows screwing of the lenses by 1/4 turn.
Reference: NIMAR-NE8DOME
Brand: NIMAR
Neoprene protection for underwater photo dome 8" 203mm NIMAR. Provides effective protection for 203mm diameter underwater camera domes.
Reference: NIMAR-NI203A
Brand: NIMAR
Nimar Acrylic Dome 203mm (8 ") in diameter, 60m maximum depth of use For use with Nimar port according to lens.
Reference: NIMAR-1018
Brand: NIMAR
Ring for mechanical zoom lens Panasonic Lumix G Vario 12-60mm f / 2.8-4 Asph. For NIMAR port 6201.
Reference: NIMAR-1018
Brand: NIMAR
Ring for mechanical zoom lens Panasonic Lumix G Vario 12-60mm f / 2.8-4 Asph. For NIMAR port 6201.
Neoprene protection with holding system for domes with 8" sunshield IKE 5510.45