Wire for IKELITE housing /1x flash IKELITE IKE4103.51
Allows transmission of the TTL.
- 1 Ikelite / Ikelite spindle protection cap (IKE 0301)
- 1 Ikelite 1cc silicone grease trap
The blue identification ring at one end of the cable indicates that the cord is compatible with the TTL mode
Never connect this cord with a TTL-compliant flash.
After use, disconnect the cord from the flash (s), lightly lubricate the seal and replace the protective cap of the pins to prevent any risk of pin seizure in the flash.