SANTI FLEX 2.0 Heating vest for drysuit - DIVEAVENUE

Heating vest SANTI FLex 2.0 for dry suit

When diving in cold water, despite a wetsuit, the heat loss is very high.

The solution is the use of the heating jacket SANTI Flex 2.0. This vest integrates a resistor which is powered by a battery external to the suit (not supplied) via an external plug specially designed to be combined with the inflator.
Made of highly flexible Climashield insulation fabric with a density of 180g/m2, it consists of three layers - the breathable Climashield Contour insulation covered with two layers of polyester protection on the inside and outside. The outer layer also has windproof properties. These thermal properties are useful in case of battery shutdown.

Available sizes : XS, S, M, L, XL, 2XL, 3XL

Technical characteristics of the SANTI Flex 2.0

• Wear-resistant Climashield Contour fabric,
• Density 180g/m2, insulation: 0.96 CLO,
• Adjustable on the sides and at the crotch, with elastics for optimal adjustment of circumference and length,
• Opening for P-valve,
• Maximum heating temperature: 45ºC,
• Maximum heating power: 55W,
• Battery Operating Time :
• SANTI 6Ah: 1h15min ~ 1h30min heating,
• SANTI 24Ah: 5 ~ 6 hours of heating,
• Safety switch to prevent overheating and excessive current,
• New generation of heating wire covered with an ultra flexible and break-resistant silicone insulation,
• Innovative synthetic power cable, resistant to high temperatures and cuts, hidden in a practical pocket,
• Ergonomic distribution of internal cables,
• Bag included.