COLTRI

COLTRI stainless steel inflation ramp with 4 flexible outlets and tap

€1,420.00
Tax included
Price excluding tax / DOM-TOM €1,183.33
COLTRI - CSC000325

COLTRI ARI inflation ramp and diving blocks With pressure relief system and 4 flexible outlets with tap and bleed.



100% secure payments
Shipping
Free Shipping From 89 € for France * * See conditions
Product return & exchange 14 days to change your mind
24/7 support 24/7 customer return guaranteed
100% secure payment By credit card, bank transfer, PayPal or check
COLTRI stainless steel inflation ramp with 4 flexible outlets and tap

COLTRI inflation ramp regulated by a 4 outlet flexible valve and taps

  • Stainless steel panel, with oil bath pressure gauge for a good stabilization of the needle, and 4 independent outlets.
    To be connected to a compressor outlet or to buffer bottles.
    This manifold allows the inflation of diving blocks and SCBA blocks of cylinders used by the fire safety services.

Technical Data Sheet:

  • Height: 20 Cm
  • Width: 60 Cm
  • Depth: 20 Cm
  • Weight: Approx. 7Kg
  • Working Pressure: 230, 300 or 330 Bars
  • Material: Stainless Steel

Equipment including:
  • 1 welded 304L stainless steel frame
  • 1 pressure reading manometer
  • 4 Coltri 1.2 metre hoses
  • 4 individual shut-off and bleed valves, in yoke, or in DIN 200, or in DIN 300, or in 26 x 200 Nitrox .
  • Inlet connection: Coltri connection (other connections available on request: 6S, 8S, 1/4").
 Installation:
  • Wall mounting with 4 screws (not supplied)
  • Connection to the compressor or buffers by flexible connection or stainless steel piping (consult us for a supply estimate).
  • It is preferable to avoid installing the ramp in an environment subject to chloramines. Chlorine is likely to form a surface oxidation film on the ramp and stainless steel tubing.

Optional extras:
  • Loading hoses secured with a whiplash cable instead of the original hoses
  • Pressure Reducing Valve TEK207000 to regulate the pressure for buffers up to 230 bar and more + safety valve
  • DIN-clamp adapter
  • Additional outputs to transform your 4 output ramp into a 5 to 16 output ramp
Cautionary note:

This inflation ramp is not equipped with a pressure reducer or safety valve. It is designed to be connected directly to the compressor or to a buffer cylinder rack already protected by a safety valve, and whose working pressure does not exceed the pressure of the diving blocks to be filled.

For any other use, we can provide you with a pressure regulator, pressure gauges and safety valves to meet your needs. Consult us for a quotation.

8 autres équipements de plongée dans Compresseurs COLTRI
Return top